D66 ECO Paper Cutter
The MOHR 66 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material.
The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale.
Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via an ergonomically positioned control panel with 5.5’’ monochrome display and additional membrane keypad.
Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming. To optimize the cutting quality the pre-clamping time can be adjusted according to the material.
Features:
- Cutting width
670 mm | 26.38 in - Feeding depth
670 mm | 26.38 in - Feeding height max.
80 mm | 3.15 in - Clamp pressure min.
180 daN | 397 lbs - Clamp pressure max.
1,500 daN | 3,307 lbs - Backgauge speed on return way (0 - ...)
70 mm/sec | 2.76 in/sec - Smallest cut, automatically, without false plate
15 mm | 0.59 in - Smallest cut, automatically, with false plate
50 mm | 1.97 in - Dimensions (w × d × h)
1,250 × 1,825 × 1,500 mm | 49.21 × 71.85 × 59.06 in - Weight
675 kg | 1,488 lbs
