Duplo DC-745 Slitter/Cutter/Creaser
SN: 111256880
Feeder Capacity 150 mm (5.9”)
In-Feed Paper Size Width
Length
210 – 370 mm (8.26” x 14.56”)
210 – 650 mm (8.26” x 25.6”)
Finished Size Minimum (WxL)
Maximum (WxL)
48 mm x 50 mm / 1.89” x 1.97”
370 mm x 650 mm / 14.56” x 25.6” (up to 39.3” (999 mm) length can be programmed and
processed using the control panel)
Paper Weight 110 – 350 gsm / 80 lb. text – 130 lb. cover (127 – 350 gsm when optional deflector module is installed)
Speed (3-Step Setting) 50 ppm (A4 SEF, lead/trim 10 mm, center crease)
40 ppm when using CCD
Image Shift Compensation Reading modes: every sheet, every “x” sheet, adjust over “x” mm shift only, first sheet only
Tolerance ±0.2 mm
Cuts Maximum 20 cuts per sheet
Creases Maximum 15 creases per sheet
Crease Depth Adjustment 3 steps (from control panel)
Exit Tray Capacity 150 mm (5.9”)
Elevator-automatically lowers as finished pieces are delivered
90 mm (3.54”)
Width: 48 – 370 mm (1.89” x 14.56”)
Length: 50 – 150 mm (1.97” x 5.9”)
Standard Features 80 job memory in main unit; test feed (1 sheet); air knife; side blow; feed skew adjustment; ultrasonic double-feed
detection; automatic job recall via barcode reading; image drift compensation via registration mark reading; reject;
waste chopper; waste box; emergency stop switch; cleaning mode; PC controller software
Power Consumption 115V: 5.5A 670W, 60Hz
230V: 3.2A 660W, 50/60Hz
Dimensions (WxDxH) In use: 2300 mm x 875 mm x 1120 mm / 90” x 34” x 44”
Required Footprint (WxDxH) 2820 mm x 1700 mm x 1620 m
(636) 757-3594