top of page
D80 ECO Paper Cutter

D80 ECO Paper Cutter

The MOHR 80 Cutter is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material.

The ultra-smooth stainless table surface equipped with air jets allows an easy handling of the material. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale.

Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via an ergonomically positioned control panel with 5.5’’ monochrome display and additional membrane keypad.

Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming.

To optimize the cutting quality the pre-clamping time can be adjusted according to the material.



  • Cutting Width
    800 mm | 31.50 in
  • Feeding Depth
    800 mm | 31.50 in
  • Feeding height max.
    100 mm| 3.94 in
  • Clamp pressure min.
    180 daN | 397 lbs
  • Clamp pressure max.
    2,700 daN | 5,952 lbs
  • Backgauge speed on return way (0 - ...)
    130 mm/sec | 5.12 in/sec
  • Smallest cut, automatically, without false plate
    15 mm | 0.59 in
  • Smallest cut, automatically, with false plate
    50 mm | 1.97 in
  • Dimensions (w × d × h)
    1,500 × 1,970 × 1,500 mm | 61.02 × 77.56 × 59.06 in
  • Weight
    900 kg | 1,984 lbs